1200kw/H Gas and Oil Dual Fuel Fired Thermal Oil Boiler for Industrial Production Manufacturer in China

• Customization: Available
• Function: Oil Boiler
• Fuel: Gas-Fired
• Model NO.: YY(Q)W-1200Y(Q)
• Installation: Packaged Boiler
• Structure: Fire Tube
• Media: Organic Heat Transfer Material
• Water Circulation: Natural Circulation
• Drum Placement: Horizontal Boiler
• Pressure: Low Pressure
• Manufacturing Level: A
• Burning Style: Chamber Combustion Boiler
• Usage: Industrial, Home, Vehicle, Power Station
• Transport Package: Naked with Plastic Film
• Trademark: REACH BOILER
• Origin: China Henan
• HS Code: 8402120090
• Production Capacity: 5000ton/Year

Product Description

"REACH BOILER" Oil (gas) fired thermal oil boiler is mainly composed of burner, furnace chamber, circulating oil pump, expansion oil tank, chimney and control system. Natural gas, LPG or light diesel fuel is used as fuel, and the open flame is injected in the furnace chamber to heat the thermal oil. In addition, when the normal operation of occasional power outages, oil (gas) heat-conducting oil furnace without the risk of continuous heating coking of the heat-conducting oil.

1. Maximum operating temperature 320 °C.
2. Pipe explosion-proof device.
3. Oil discharge and return temperature display.
4. Isolated electrical control box to extend the service life of electrical appliances.
5. Hot oil BY-PASS pressure relief circuit.
6. Oil pump horsepower and heating power can be customized.
7. Electrical components mainly adopt OMRON, FUJI, TE, LS, SIEMENS, ABB, JUMO.
8. Adopt skid-mounted type module design, easy to install and easy to operate.
9. Using multi-layer coils for heat exchange, the heat receiving area is sufficiently arranged, the surface heat load is low, so that the heat-conducting oil is not easy to coke and accumulate carbon.
10. Fuel in the furnace for adiabatic combustion, can make the combustion fire easier, more fully combustion, better improve the thermal efficiency of the boiler.

Model:YY(Q)W Type Gas/Oil Fired Thermal oil Boiler
Structure:Oil Tube Three Pass
Rated Steam Capacity:0.10-20 ton/hr

Rated Steam Pressure:1.0Mpa

Rated Steam Temperature:320°C

Application:Textile Mill,Food and Beverage,Chemical,Medicine,Light Industry,Rubber,Printing and Dyeing Plant,Paper Mill,Wood Processing,Garment and Laundry etc.

Model No.	YY(Q)W-120Y(Q)	YY(Q)W-240Y(Q)	YY(Q)W-350Y(Q)	YY(Q)W-500Y(Q)	YY(Q)W-700Y(Q)	YY(Q)W-1000Y(Q)	YY(Q)W-1200Y(Q)	YY(Q)W-1400Y(Q)
Rated thermal power (kw)	120	240	350	500	700	1000	1200	1400
Medium outlet temperature (ºC)	≤350°C
Applicable fuel	Natural gas/LPG/CNG/Diesel Oil/Heavy Oil/Waste Oil
Efficiency	≥95%
Diesel Consumption (Kg/h)	12	25	37	52	69	100	120	140
Natural  Gas (Nm³/h)	15	30	44	63	83	120	145	170
Expansion tank volume(M^3)	0.5	0.5	1.5	1.5	1.5	2	2	2.5
Oil storage tank volume (M^3)	1	1	2.5	2.5	2.5	4	4	5
Weight (t)	1.5	2	2.6	3	3.7	5	5.8	6.7
Overall dimensions (L*W*D(mm))	1650*1050*1520	1900*1200*1900	2150*1400*2050	2200*1400*2050	3250*1450*2250	3350*1650*2450	3800*1750*2600	4150*1900*2800

 

Model No.	YY(Q)W-1800Y(Q)	YY(Q)W-2100Y(Q)	YY(Q)W-2400Y(Q)	YY(Q)W-3000Y(Q)	YY(Q)W-3500Y(Q)	YY(Q)W-47000Y(Q)	YY(Q)W-6000Y(Q)	YY(Q)W-7000Y(Q)
Rated thermal power (kw)	1800	2100	2400	3000	3500	4700	6000	7000
Medium outlet temperature (ºC)	≤350°C
Applicable fuel	Natural gas/LPG/CNG/Diesel Oil/Heavy Oil/Waste Oil
Efficiency	≥95%
Diesel Consumption (Kg/h)	180	210	244	300	350	470	580	680
Natural  Gas (Nm³/h)	220	260	290	365	425	570	705	780
Expansion tank volume(M^3)	2.5	2.5	3	3	3	5	5	6
Oil storage tank volume (M^3)	5	5	8	8	8	10	10	15
Weight (t)	7.8	8.8	9.8	15.5	17.8	21.5	25	27.5
Overall dimensions (L*W*D(mm))	4600*2000*3050	5000*2050*3100	5000*2250*3100	6000*2400*3400	6550*2500*3600	7300*2600*3700	7800*3050*3800	8200*3050*3800

Technical Advantages

Safety

Boiler body uses the forced circulation in the high temperature area to make sure all heating areas can be cooled down and avoid vaporization; The explosion door and flame detector are equipped for safe and reliable operation. Comb plates are used between both sides of boiler and tube bundle to avoid leakage of condensate and gas caused by using refractory concrete as sealing material. Air proof test is done before delivery in the factory to guarantee any gas leakage problem.

Environmental protection

Big combustion chamber equipped with Low emission combustion burner effectively reduce the NOx to 30mg/m3. Smoke duct and smoke outlet use internal insulation to reduce operating noise.
Combustion chamber uses full membrane water cooling wall structure and pressurized combustion without smoke mixture.

Energy conservation
Good quality alumina silicate fiber and fire clay insulation material are used and the boiler body temperature is controlled below 45ºC and greatly heat loss is reduced. Combustion chamber is designed with narrow distance tube membrane water cooling wall which has good air proof to reduce heat lost and increase boiler thermal efficiency. Internal inspection holes uses high-alumina refractory and manhole cover seal devices, solving superheat problem in this part caused by using refractory bricks.

Convenience
Manholes are placed on the front and back side of drums and inspection doors on back side of boiler easy to open for inspection and clean inner and outer parts.

Longer lifespan
Membrane structure are used in the front and back wall for boiler body and highly increased their lifespan to over 20 years.
The key processes including material cutting, rolling, drilling are done by advanced CNC machining process to reduce the assembly stress and extend boiler service lifetime.
Flutter prevention fastener is used for high temperature part convection tubes, which avoid convection tube cracking problem.
Longitudinal and girth joint adopt advanced automatic submerged-arc welding for good welding quality. All longitudinal and girth joint will be tested by radiographic inspection.

    Henan Reach Special Equipment Co., Ltd. is located in the central city of Zhengzhou, Henan Province, China. Our company is a professional trade supplier of industrial equipment such as boilers, with 12 production companies with various qualifications and over 30 employees. Mainly engaged in the design and sales of oil and gas steam boilers, coal/biomass steam boilers, oil and gas thermal oil boilers, coal/biomass thermal oil boilers, electric heating steam boilers, oil and gas hot water boilers, and medium and high temperature hot air furnaces. The manufacturers our company collaborates with are all legitimate production enterprises with A-level and B-level qualifications for Chinese boiler manufacturing. They have various certifications both domestically and internationally, including CE certification, ASME certification, etc., which can fully meet the matching requirements for boilers in various production environments in different countries. The factories our company collaborates with are all based on the manufacturing and production of various pressure vessels such as steam boilers, thermal oil boilers, and autoclaves. We have established an industrial system that integrates product development, engineering project design, equipment manufacturing, engineering installation, system debugging, pre-sales, sales, and after-sales services. Our company's products are not only sold and widely praised in the domestic market of China, but also exported to more than 60 countries and regions such as South Korea, Vietnam, Myanmar, Mongolia, the Philippines, and Indonesia, receiving recognition and pursuit from customers. I believe that our company can bring objective benefits to customers with advanced technology, excellent equipment, excellent products, and exquisite services. We look forward to long-term friendly cooperation with friends from various countries! Welcome to our store!

 

 

 

Q1: How to install a boiler?

A1: Reach Boiler provides completed installation drawing and operation manual, or can send engineer to your site for guiding and trainning.

 

Q2: How many years is the boiler's life span

A2: The boiler is designed for at least 10 years life span, but under good maintenance, usually the boiler can use at least 15 years, Reach Boiler provide full life after-sales service to each sold boiler.

 

Q3: How to choose a boiler model?

A3: Confirm the type (steam or hot water), capacity, working pressure (or output temperature) and fuel(coal, biomass, gas or oil or other fuel) of the boiler, Yineng Boiler will suggest a suitable model based on your usage.

 

Q4: How is the warranty term?

A4: If any problems caused for quality during the warranty period, the Seller will repair or replace the broken parts for free, if the problem caused from the client's side, the Seller will help supply the spare part at lowest cost.